| 255 | 13 | 42 |
| 下载次数 | 被引频次 | 阅读次数 |
针对气缸套内表面加工采用普通机械珩磨工艺的缺点,提出了激光造型加工技术,该技术在经过镜面珩磨加工的缸壁上进行表面激光造型加工,在气缸套内表面上形成可控储油槽体系。实验证明,采用激光造型加工技术加工气缸套内表面,可降低排放减少润滑油的消耗,提高发动机的动力性、经济性、提高内燃机的使用寿命和可靠性。
Abstract：This paper proposed the laser texturing technology in order to make up for the shortcoming of using the ordinary machinery honing craft to process the cylinder sleeve internal surface.This technology forms controllable oil tank system in the internal surface of the cylinder sleeve through the laser texturing process after the mirror honing on the cylinder wall.The experiment proves that using such technology to process the cylinder sleeve internal surface may reduce the emission and the consumption of lubricating oil,as well as enhance the power,efficiency,service life and reliability of engines.
[1]杨光明,程丽君.发动机气缸套内表面平台网纹的加工技术[J].工具技术,2004,38(11):61-62.
[2]刘炳仁,甄东生,李江,等.240B型柴油机新型整体ADI平台珩磨网纹气缸套研制[J].铁道机车车辆,2006,26(4):54-55.
[3]梁全顺.柴油机气缸套内表面平台琦磨网纹技术的探讨[J].内燃机车,2001(11):18-21.
[4]陆华才,符永宏.气缸套珩磨工艺的发展[J].内燃机,2003(6):8-9.
[5]Haasis G.Praktische Erfahrungen Beim Plateau-Honen[J].Jahrbuch Schleifen,Honen,L仭ppen und Polieren,1977,48:371-392.
[6]Malburg M C,Raja J.Characterisation of Surface Texture Generated by Plateau Honing Process[J].Annals of the CIRP,1993,42(1):637-639.
[7]姬芬竹,杜发荣,张桂香,等.风冷柴油机气缸套缸内传热边界条件[J].洛阳工学院学报,2000,21(4):61-64.
[8]薛德喜,行心聪,党向军.气缸套内孔磨削加工技术[J].内燃机配件,2006(6):14-15.
基本信息:
DOI：10.15926/j.cnki.issn1672-6871.2009.02.018
中图分类号:TK406
引用信息:
[1]李树林,殷建祥.发动机气缸套内表面激光造型加工技术[J].河南科技大学学报(自然科学版),2009,30(02):26-28+31+110-111.DOI:10.15926/j.cnki.issn1672-6871.2009.02.018.
基金信息:
河南省重大科技攻关基金项目(072101210300)
2009-04-15
2009-04-15